SEA & SEA Strobes

SEA & SEA dual sync cords are used to connect dual SEA & SEA strobes to a compatible SEA & SEA underwater camera housings.
All new housings, including the MDX-D300, MDX-40D, MDX-Pro Mark III and MDX-D3 all use this syle cord.

SEA & SEA 5-pin Sync Cord N is used for connecting a single SEA & SEA strobe to a SEA & SEA DSLR housing.

The arm and universal stay set is newly designed, based on the Sea Arm VI but lighter and more compact.The arm and universal stay set is compatible with most housings for compact digital cameras (SONY, PENTAX, Nikon, CASIO, Canon, OLYMPUS) sold on the market.

This multiple-type arm stay set has been updated to allow greater tightening force. Plastic resin construction prevents electric corrosion and makes it more durable. The new ball joint design allows firmer tightening and smoother loosening, and tighter grip at each joint makes arm position more secure.
[Construction] Plastic resin reinforced with glass fiber

This multiple-type arm stay set has been updated to allow greater tightening force. Plastic resin construction prevents electric corrosion and makes it more durable. The new ball joint design allows firmer tightening and smoother loosening, and tighter grip at each joint makes arm position more secure.

SEA & SEA converter used for TTL Photography with SEA & SEA Housings for Canon DSLR's.
Compatible with Sea and Sea YS250.

Fiber optic cables to connect YS-series strobes to digital camera housings.

This fiber-optic cable resists bending and has improved light-conducting efficiency.

This stay and arm set is for attaching an external strobe or light to the Marine pack

SEA & SEA Hot Shoe Arm is great for attaching focus lights and other accessories to the hot shoe mount on your SEA & SEA DSLR Housing.

When using the YS-17 or other external strobes, mask the internal flash part of the Marine pack and attach the Fiber-Optic Cable (L-type) (cable sold separately).

This converter is equipped with a built-in TTL PCB that connects a Nikon digital SLR with SEA&SEA YS-Series strobes and uses the cameras TTL flash adjustment to control the amount of light put out by the strobe. The converter allows quick switching underwater between TTL mode and manual mode from outside the camera. You can use the TTL correction dial after checking the results of a shot in the LCD monitor to adjust the amount of strobe light for the next shot. Because the converter comes with two separate strobe connectors, you can use advanced automatic TTL flash adjustment with two strobes.

SEA & SEA TTL III Converter for Canon, allows TTL strobe photography with compatible SEA & SEA DSLR housings for Canon cameras.

The YS-17 TTL slave strobe is an ideal strobe for most compact digital cameras available on the market today. SEA&SEA's latest strobe offers a guide number of 14, beam angle of 70x53 and a
recycle time of 3 seconds. It is powered by 2 AA batteries and offers a 2-step light level control and TTL functionality

The YS-250PRO is designed for demanding professionals, packed with revolutionary new features to meet the challenges of digital photography.
A large circular arc tube emits a powerful flash at guide number 32 (its value on land, ISO 100/m) when power is set to FULL. It provides incremental manual flash power adjustment in 12 steps for graduations of light.

The YS-27DX strobe is designed for multipurpose underwater photography. This new strobe has beam angle of 105 x 84 and a guide number of up to 20 (ISO 100 / m) / 66 (ISO 100 /feet), providing spread and power for subjects that range from wide-angle macro.
The light level control dial of the YS-27DX has nine different light level controls, which increments from a minimum power of GN 1.7 to a maximum power of GN 20 (1EV step). The light level control dial makes you to take ideal pictures, precisely adjustable to get just the right amount of light for the subject at hand.

The YS-110a introduces numerous new exciting functions, opening a whole new digital generation. For example, by connecting it to digital cameras with pre-flash function using a fiber-optic cable, the YS-110a can be used in the fully automatic DS-TTL adjustment mode (Digital Slave TTL).
Enjoy complete creative control - when you want absolute control over fine light adjustments, you can use a main strobe in DS-TTL mode and a secondary strobe in manual mode or you can set up an advanced lighting system using two strobes in DS-TTL mode.